Modern Machine Shop is focused on all aspects of metalworking technology - Providing the new product technologies; process solutions; supplier listings; business management; networking; and event information that companies need to be competitive.
Issue link: https://mms.epubxp.com/i/155490
weSTeC 2013 October 15 - 17 a chip-to-chip time of 4.5 sec. Larger linear rails are mounted to a machined shoulder for increased rigidity and wedge-locked to the frame to reduce vibration. Pre-loaded and stretched ballscrews are anchored at both ends. The Hurco integrated control is optimized for HSM with a 64-GB solid-state drive, 2 GB of memory, a 2-GHz dual-core Intel processer, processing speed ranging to 2,277 bps and dynamic variable look-ahead with capacity of 10,000 blocks. Hurco Companies Inc., call 800-634-2416 or visit hurco.com. Multitasking turning Center CoMpresses lead tiMes Hyundai Wia , BootH 2612 Hyundai WIA will display its LM2500TTSY multitasking turning center featuring upper and lower turrets as well as twin spindles for increased productivity. The turning center is designed to compress lead times while performing milling and turning operations in a single setup. The machine's upper turret uses a wedge-type Y axis to enable machining complex parts in a single chucking. The Y-axis travel is ±50 mm to accommodate a range of workpieces. Spindle specifications for the left and right are 4,000 rpm a n d 3 5/20 h p w i th a n A 2- 8 s p i n d l e n o s e. Each spindle features precision angular bearings for smooth machining with minimal noise and vibration. A spindle chiller helps to control temperature. The machine features a 45-degree slant-bed METROLOGY SOLUTIONS On the shop floor, it's... OUT with traditional. IN with optical! HandyPROBE Portable CMM featuring the TRUaccuracy technology The HandyPROBE outperforms traditional portable CMMs on the shop floor. Because it is truly portable and insensitive to changes in the environment (e.g. part displacement, set-up or CMM instability), it is highly efficient at measuring parts that can't be moved to a granite or cast iron table. The HandyPROBE can also be paired with a MetraSCAN 3D scanner to offer scanning capabilities. It is currently used on the production lines of major players from the automotive, aerospace and manufacturing industries. 302.444.6696 www.creaform3d.com PORTABLE 3D MEASUREMENT SOLUTIONS 170 MMS September 2013 mmsonline.com VISIT US AT QUALITY EXPO: BOOTH 125