Modern Machine Shop

SEP 2013

Modern Machine Shop is focused on all aspects of metalworking technology - Providing the new product technologies; process solutions; supplier listings; business management; networking; and event information that companies need to be competitive.

Issue link: https://mms.epubxp.com/i/155490

Contents of this Issue

Navigation

Page 188 of 243

strategy for spline finishing is well-suited for machining parts with unique curves, such as the angulated abutments found in the dental implant industry. The ASM-MX feature applies across the entire PartMaker CAM suite, including the Mill, Turn-Mill and SwissCAM modules. PartMaker Division of Delcam Plc, call 888-2706878 or visit partmaker.com. Vise enables second operation Machining Kurt Manufacturing co., Booth 3601 Kurt's SideWinder vise mounts to the back of the company's industry-standard 6" vises to provide ve r tic a l wor k holding for se cond- ope ration m a c h i n i n g i n a s i n g l e s etu p. Fe atu r i n g a n 80,000-psi ductile iron body, the vise is well-suited for machining operations including precision boring, tapping, drilling and finishing on most part configurations. An integral bracket with stabilization feature enables mounting to the machine table on the movable end of the vise, and a workstop provides vertical positioning. According to the company, the elevated position enables longer-reach machining that does not interfere with the operating envelope of the host vise. Featuring the company's Anglock design for decreased jaw deflection, the vise is said to distribute the clamping force evenly and precisely across the full jaw surface. The company will also display its expanded pull-type HD690 vise, 3400 ultra-precision vise and MaxLock five-axis vise lines. Kurt Manufacturing Co., call 877-226-7823 or visit kurtworkholding.com. HARDINGE KNOWS WESTEC 2013 October 15 - 17 Less than 10 seconds That's how long it takes to change a collet using the Hardinge quick-change FlexC™ collet system. Compare that to your current changeover: Standard Collet Chuck: – 79 seconds or (3) Chuck Jaws: – 191 seconds We did the math. Now you make the profit. videos.hardinge.com/Under10 mmsonline.com September 2013 MMS 187

Articles in this issue

Links on this page

Archives of this issue

view archives of Modern Machine Shop - SEP 2013