Modern Machine Shop is focused on all aspects of metalworking technology - Providing the new product technologies; process solutions; supplier listings; business management; networking; and event information that companies need to be competitive.
Issue link: https://mms.epubxp.com/i/155490
TOOLING AND WOrKhOLDING RotaRy table PRovides incReased toRque The Haas HRC210 high speed rotary table is driven by a roller cam system with a high-torque servomotor driving a globoidal cam. The cam meshes with followers equally spaced around the diameter of a roller gear. Needle bearings in the followers provide smooth contact with the cam, and a precise cam profile ensures accurate speeds and motion, the company says. The roller drive is preloaded during assembly, and the system is said to yield high stiffness, torque and speeds while reducing wear and maintenance. The 21-mm (8.3") rotary table provides cutting and indexing speeds ranging to 830 degrees/sec. and maintenance. Constructed of cast iron GGG- Indexing accuracy is ±30 arc-sec. with repeat60, the vise features precision aligning slots and ability of 4 arc-sec. Maximum spindle torque is a positioning hole on the bottom of the vise, as 110 foot-pounds (149 Nm) for synchronous well as pre-machined holes in the vise shoulders fourth-axis machining. A pneumatic break yields 134 foot-pounds (182 Nm) of holding torque for for mounting directly to a table. stationary work. The 8.27" (210-mm) platter offers Dapra Corporation, call 800-243-3344 or visit a center height of 6.000" (152.40 mm), ±0.001", dapra.com. Precision Tools FOR THE METALWORKING INDUSTRY 1 SINCE 1914 GS ATALO online C view our 2 3 cogsdill.com Ẅ burnishing ẅ deburring & back-spotfacing P 803.438.4000 F 803.438.5263 Ẇ shefcut reaming & boring PO BOX 7007 CAMDEN, SC 29021-7007 VISIT US AT EMO-HANNOVER, GERMANY HALL 4, BOOTH #D72 SEPTEMBER 16-21, 2013 AND WESTEC LOS ANGELES, CA, USA OCTOBER 15-17, 2013 BOOTH #3407 194 MMS September 2013 mmsonline.com ẇ recessing & generating heads 4 5 Ẉ zx systems COGSDILL TOOL PRODUCTS, INC. ©2013