Modern Machine Shop

SEP 2018

Modern Machine Shop is focused on all aspects of metalworking technology - Providing the new product technologies; process solutions; supplier listings; business management; networking; and event information that companies need to be competitive.

Issue link:

Contents of this Issue


Page 130 of 220

MMS SEPTEMBER 2018 128 IMTS 2018 Products On Display Milling/Drilling/ Tapping Center Combines Speed, Rigidity The GenMill T-500 milling/drill- ing/tapping center from Ganesh Industries features a 12,000-rpm spindle that can tap at 6,000 rpm. Rapid traverse rates are 2,362 ipm in all three axes, and table travels measure 20" × 17". A 21-station tool turret offers 1.6- sec., chip-to-chip tool-change time. The machine features six air-vises. An enclosure with a top cover is included along with auto- matic power-off and pre-installed, fourth-axis wiring. The machine also features roll- er-bearing ways, a dual-contact Big-Plus spindle, and the Mitsub- ishi M80 control with 1,350 block look-ahead and 135,000 block per min. processing speed. It also includes a 32-GB data server and Nano Smoothing. The machine will be shown with a fully integrated Mitsubishi robot, pallet and tool-changing system featuring teach-point programming. | Ganesh Industries LLC | South, Level 3, Booths 338045, 338048

Articles in this issue

Links on this page

Archives of this issue

view archives of Modern Machine Shop - SEP 2018