Modern Machine Shop

SEP 2018

Modern Machine Shop is focused on all aspects of metalworking technology - Providing the new product technologies; process solutions; supplier listings; business management; networking; and event information that companies need to be competitive.

Issue link:

Contents of this Issue


Page 208 of 220

MMS SEPTEMBER 2018 206 IMTS 2018 Products On Display Shank Attachments for Angle Heads Accommodate Deep Cavities Tecnara offers shank attachments for use with com- pact, high-speed NSK compact angle heads. Featuring integrated air/oil lubri- cation, the shanks can handle speeds ranging to 20,000 rpm, while a compact design facili- tates machining of deep and small-diameter cavities. Available shank styles are CAT40, CAT50, BT30, HSK63, HSK100 and C6. Also on display are the company's MST Modular series angle heads. Featuring a mod- ular design that provides interchangeability among shanks and heads, these units are said to be particularly useful for short-run jobs. A wide range of projection lengths and collets are available. Angle heads measure either 45 degrees or 90 degrees. Miniature angle heads for tight- space applications are also available as are 2", 4" and 6" extensions. In select models, modular series attach- ments are available with coolant-through cutting tools. Designed for heavy-duty cutting, MST Solid series angle heads can be switched among machines with the same taper and flange. Equipped with an orientation ring and key, they can be set for any cutting direction. Flange series heads are available in three angle-shaft configura- tions: collet chuck, BT30 and CAT40 master-holder type. According to the company, accuracy of 0.0002" total indicator reading at the cavity is guaranteed. MST Flange heads bolt onto the spindle face for maximum rigidity. The MST Half series of angle heads are designed for light-duty operations, including drilling, tapping and milling. The Half Mini is lightweight and slim. With a maximum 1 / 4 " chucking capacity, it fits into inner diam- eters as small as 1.42". Half Universal angle heads can cut any angle from 0 to 360 degrees and 0 to ±120°. All Half Series angle heads are available in CAT, BT, HSK, Capto and KM shaft configurations. | TecNara Tooling Systems Inc. | West, Level 3, Booth 432071 201 Johnson St., P.O. Box 586, Covington, KY 41011 phone: 859.581.7511 • toll free: 888.246.6365 • fax: 859.581.9642 • email: THE KEYSEATER SPECIALISTS! SHOW SPECIAL! Order Both and Save ..... While Supplies Last ..... Call For Pricing ..... 1¼" Keyseater FEATURES AND BENEFITS: • The newly redesigned Morrison 3" Keyseater has been physically modified and is more rigid than ever! The back support bracket is twice the length of the older models, enabling more accurate keyways in various materials. • The overhead support is now easily raised and lowered by hydraulics with the push of a button. The programming is now extremely user friendly with the use of a programmable logic controller and human machine interface (HMI). • As in the past, the Morrison Keyseater does not require to be positioned in a pit, and needs no bushings to center the keyways. Cuts from 1/8" to 3" wide and 14" high. Since 1956! MADE IN USA PROUDLY 3" Keyseater

Articles in this issue

Links on this page

Archives of this issue

view archives of Modern Machine Shop - SEP 2018